Discuss

discuss@lists.surbl.org

1864 discussions

RE: [SURBL-Discuss] No install Problems with 0.10
by Paul Barbeau 14 Apr '04

14 Apr '04

Yep > -----Original Message----- > From: Charles Solomon [mailto:csolomon@aldridge-borden.com] > Sent: April 14, 2004 2:54 PM > To: Paul(a)hypernet.ca; discuss(a)lists.surbl.org > Subject: RE: [SURBL-Discuss] No install Problems with 0.10 > > > Do you get a clean bill of health when you --lint?

1 0

RE: [SURBL-Discuss] No install Problems with 0.10
by ITReading ITReading 14 Apr '04

14 Apr '04

Do you get a clean bill of health when you --lint? >>> Paul Barbeau <Paul(a)hypernet.ca> 04/14/2004 12:11:43 PM >>> > Did you remember to copy the .cf file to your spamassassin > rules folder? (I only mention this b/c I tend to forget to > do the most obvious of steps). Yep i put it in both places > > If you run spamassassin -D -t on a test message, do you see > it attempting to perform the queries? Nope it does not look line it

1 0

RE: [SURBL-Discuss] No install Problems with 0.10
by Charles Solomon 14 Apr '04

14 Apr '04

1 0

RE: [SURBL-Discuss] No install Problems with 0.10
by Paul Barbeau 14 Apr '04

14 Apr '04

> Did you remember to copy the .cf file to your spamassassin > rules folder? (I only mention this b/c I tend to forget to > do the most obvious of steps). Yep i put it in both places > > If you run spamassassin -D -t on a test message, do you see > it attempting to perform the queries? Nope it does not look line it

1 0

RE: [SURBL-Discuss] No install Problems with 0.10
by Paul Barbeau 14 Apr '04

14 Apr '04

ok then what am i missing could it be as i am running in CHROOT (OpenBDS) > -----Original Message----- > From: David Coulson [mailto:david@davidcoulson.net] > Sent: April 14, 2004 8:59 AM > To: Paul Barbeau > Cc: ''discuss(a)lists.surbl.org' ' > Subject: Re: [SURBL-Discuss] No install Problems with 0.10 > > > Paul Barbeau wrote: > > I guess i spoke to soon.. The "make test" works and it > looks like the "make > > install" works however when i send an email through with > > "http://nothere/" in it nothing gets tagged. Is that the > correct URL > > to use to confirm it is working? > > It filtered it out here :-) > > 3.0 WS_URI_RBL URI's domain appears in spamcop > database at > ws.surbl.org > [test.surbl.org is blacklisted > in SpamCop > RBL at] > [ws.surbl.org] > 4.0 SC_URI_RBL URI's domain appears in spamcop > database at > sc.surbl.org > [test.surbl.org is blacklisted > in SpamCop > RBL at] > [sc.surbl.org] > > David > > -- > David Coulson email: > d(a)vidcoulson.com > Linux Developer / web: > http://davidcoulson.net/ > Network Engineer phone: > (216) 533-6967 >

1 0

RE: [SURBL-Discuss] No install Problems with 0.10
by Paul Barbeau 14 Apr '04

14 Apr '04

I guess i spoke to soon.. The "make test" works and it looks like the "make install" works however when i send an email through with "http://test.surbl.org/" in it nothing gets tagged. Is that the correct URL to use to confirm it is working? Any ideas? Paul

2 1

RE: [SURBL-Discuss] 0.10 install difficulties
by Steve Wakelin 14 Apr '04

14 Apr '04

Raymond, It was Net::DNS that was not uo to the latest revision. Installed this from CPAN and all is now OK. Many thanks Regards /Steve -----Original Message----- From: Raymond Dijkxhoorn [mailto:raymond@prolocation.net] Sent: 14 April 2004 02:12 To: Steve Wakelin Subject: Re: [SURBL-Discuss] 0.10 install difficulties Hi! > Logged out > # make clean > # perl Makefile.PL > # make > # make test > > Same error > Has anyone got it to work on FC1? I can try at work tomorrow to compile in on FC1, i currently are running the URI checks on 2 RH9 boxes. Bye, Raymond.

2 1

[SURBL-Discuss] Fix for the "syntax error at /etc/pamassassin/spamcop_uri.cf" errors
by Daniel Patterson 14 Apr '04

14 Apr '04

Hello all, This is a quick note to those who are getting the following errors under 2.63: Failed to compile URI SpamAssassin tests, skipping: ^I(syntax error at /etc/spamassassin/spamcop_uri.cf, rule SPAMCOP_URI_RBL, line 1, near "eval:" syntax error at /usr/share/spamassassin/20_uri_tests.cf, rule URI_OFFERS, line 175, near "; }" ) The cause of this error is the perl module loader path being set such that your new, shiny SpamCopURI classes are not replacing their original counterparts in the original SA distribution. I'm running Debian, and I noticed, in /usr/bin/spamassassin and /usr/sbin/spamd the following line: use lib '/usr/share/perl5'; The actual content of this line will vary depending on your system, but if you're experiencing the above error, this is the source of your troubles. To fix it, I add the following immedietly after the previous "use lib" line: use lib '/usr/share/perl5'; use lib '/usr/local/share/perl/5.8.3'; This prepends /usr/local/share/perl/5.8.3 to the module search path, which will make the newly installed Spamassassin modules be loaded in preference to those found elsewhere on your system. You could possibly also remove the "use lib" line altogether, but I haven't tried that. daniel

1 0

No install Problems with 0.10
by Paul Barbeau 14 Apr '04

14 Apr '04

I just ran "make test" for the first time with no errors (ya) so all the error with the 0.099 install have been fixxed. I am going to install it on a "clean" machine just to confirm i have no problems again. Paul

1 0

0.10 install difficulties
by Steve Wakelin 14 Apr '04

14 Apr '04

Hello, Some background [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# uname -a Linux qmail.wcslnet.net 2.4.22-1.2174.nptl #1 Wed Feb 18 16:38:32 EST 2004 i686 i686 i386 GNU/Linux [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# perl -v This is perl, v5.8.3 built for i386-linux-thread-multi [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# rpm -qa | grep perl perl-DateManip-5.40-30 perl-URI-1.21-7 perl-XML-Dumper-0.4-25 perl-5.8.3-16 perl-DBI-1.37-1 perl-Filter-1.29-8 perl-HTML-Tagset-3.03-28 perl-Parse-Yapp-1.05-30 perl-libwww-perl-5.65-6 perl-libxml-perl-0.07-28 perl-XML-Encoding-1.01-23 mod_perl-1.99_12-2 perl-HTML-Parser-3.26-18 perl-XML-Parser-2.31-16 perl-libxml-enno-1.02-29 perl-DBD-MySQL-2.9002-1 [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# All other prerequisites installed. [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/bad..............ok t/blacklist........ok t/cache............ok t/dnsrbl...........NOK 1# Failed test (t/dnsrbl.t at line 16) t/dnsrbl...........NOK 2# Failed test (t/dnsrbl.t at line 18) t/dnsrbl...........NOK 5# Failed test (t/dnsrbl.t at line 25) t/dnsrbl...........ok 6/6# Looks like you failed 3 tests of 6. t/dnsrbl...........dubious Test returned status 3 (wstat 768, 0x300) Scalar found where operator expected at (eval 153) line 1, near "'int' $__val" (Missing operator before $__val?) DIED. FAILED tests 1-2, 5 Failed 3/6 tests, 50.00% okay t/good.............ok t/ipaddress........ok t/longhostname.....ok t/mailto...........ok t/merge_urls.......ok t/shorthostname....ok t/spamcop_fetch....ok t/spamcopuri.......ok t/whitelist........ok Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/dnsrbl.t 3 768 6 3 50.00% 1-2 5 Failed 1/13 test scripts, 92.31% okay. 3/62 subtests failed, 95.16% okay. make: *** [test_dynamic] Error 255 [root@qmail Mail-SpamAssassin-SpamCopURI-0.10]# Any suggestions? Regards /Steve

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss